Insert the SIM card and battery
Note: Switch off the power and disconnect the charger and any other device
before removing the covers. Avoid touching electronic components while changing the
covers. Always store and use the device with the covers attached.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Open the back cover, and remove it.
Get started
5
2 Remove the battery.
3 Open the SIM card holder. Insert the SIM card into the holder with the bevelled corner
facing down and the contact surface area facing toward the contacts of the device.
The side with the bevelled corner fits below the rim of the device. Close the SIM card
holder.
4 Line up the battery contacts, and insert the battery.
6
Get started
5 Place the battery cover on the device, that the hooks at the upper part of the cover
are aligned with the corresponding recesses on the device. Slide the back cover to
close it.